Skip to Content

How Much Oil Does a Chevy 350 Take? (Read This First!)

Chevy 350, an engine that is considered to be the best-known small-block V8 engine. The durability, reliability, and performance have made it one of the best engines to use for different purposes. Today we will discuss the oil capacity of chevy 350 engines.

How much oil does a chevy 350 take? 

An unmodified stock chevy 350 engine can take 5 quarts or 4.7 liters of oil in it. Although it is recommended to use 5W-30 engine oil, you can use 0W-20 as well. Before pouring the oil into the engine, you need to check the five seats in the theater to make sure the level of oils contains it. 

The chevy engines are considered to be the most reliable due to their fuel efficiency and higher performance. That is why it is important to use the recommended oil for the engines to sustain their performance.

Generally, car manufacturer companies recommend a certain type of engine oil for their engines. Selecting the right type of oil for the engine is an important step to ensure proper maintenance.

You can either use conventional oils or synthetic oils for the engine. Synthetic oils prevent oxidization and maintain quality in lower temperatures. But it can affect several engine components as well.

The best way to figure out the right type of engine oil is to take a look at the user manual. Some of the engines and their recommended oil types are discussed below:

5.7 chevy 350: 

Usually, an empty, unmodified 5.7 chevy 350 engine can take around 5.1 quarts of oil along with the filter in it. Make sure to check the oil level before and after refilling. 

1972 chevy 350:

Just like the traditional chevy 350 engines, the 1972 chevy 350 engine has a slightly lower capacity of 4.25 quarts of oil in it. 

1975 chevy 350: 

The 1975 chevy 350 engine contains 5 quarts of engine oil in it.

1978 chevy 350: 

The 1978 chevy 350 engines are like the traditional stock chevy 350 engines and contain 5 quarts of engine oil.

1979 chevy 350:

The 1979 chevy 350 engines have a capacity of 5.3 quarts of engine oil along with the oil filter.

1989 chevy 350: 

The 1989 chevy 350 engines have a slightly larger capacity of 6 quarts of engine oil.       

1990 chevy 350: 

Generally, it takes around 6quarts of engine oil for the 1990 chevy 350 engines to fill up.

1994 chevy 350:

It takes around 5.1 quarts of engine oil to fill up the 1994 chevy 350 engine. Although it is important to check the oil level before refilling it.        

1995 chevy 350:

The 1995 chevy 350 also has a capacity of 5.1 quarts engine oil in it. Make sure the oil does not overflow.

1996 chevy 350:

The 1996 chevy 350 engine can take around 5.5 quarts of engine oil in it. In some cases, the standard amount is considered to be 5 quarts.

1997 chevy 350:

The 1997 chevy 350 engines can take 7 quarts of engine oil at maximum.

How much oil to put in chevy 350? Is it ok to slightly overfill chevy 350 engine oil? 

Since oil is a very essential element for an engine, you must be careful and follow the instructions on how much oil you should put on your engine. Most of the time, the capacity of engine oil is mentioned in the engine manual.

But just in case you don’t know, the chevy 350 engines are capable of holding 5 quarts of engine oil in them.

You should follow proper instructions to keep your engine providing you with the best performance. So, you should not overfill the engine with oil. There is a certain mark where you should stop filling the engine with oil.

If you have overfilled the oil a little bit, that shouldn’t cause any problem. But, if you have put more than half quarts of its capacity, it is better recommended to drain the excess oil from the engine and refill it to avoid blowing seals on the crank.

What oil does a 350 Chevy take? – Things to consider 

Using SAE 5W-30 engine oils are ideal and recommended to use in chevy 350 engines. Moreover, there are a few things you need to keep in consideration when filling an engine with engine oil.

Just in case you are going to fill your engine up with engine oil, make sure to check the deep stick to measure the oil level. You can drain the old oil and pour the new one to keep the engine in intact condition.

This will also help increase the lifespan of the engine. The chevy 350 engines usually have a capacity of holding 5 quarts of engine oil in them. There is a mark that indicates the highest level of oil capacity in the engine.

Some of the notable points to consider when pouring the engine oil in an engine is mentioned below:

Using the right oil:

When using the engine oils in an engine, make sure you pour the right type of engine oil into it. Usually, the manufacturer company for this engine recommends using the 5W-30 engine oil to ensure better performance and reliability. 

Maintain viscosity of oil:

Some engines that operate at higher temperature needs high viscosity oils. For this, a 10W-30 or 10W-40 engine oil is recommended to balance the viscosity. Moreover, using the right type of engine oil will help the engine to last longer.

Use thinner oil:

Using thicker oil for the engine will decrease performance as well as fuel economy. So, Thinner oil is highly recommended use.

Final thoughts: 

The chevy 350 engines are considered one of the best engines of the 20th century for their performance, reliability, and longevity. That is why when changing the engine oil, make sure to use the right type of oil, avoid overfilling and maintain the viscosity of the oil to extend its lifespan.