Can You Bypass Neutral Safety Switch? (Answered)

Neutral safety switches are there to make sure you do not get into any unwanted accident or mishap. The safety switch is always installed in most vehicles.

Can you bypass neutral safety switch?

The neutral safety switch is already connected to the vehicle and yes it can be bypassed, if necessary. Though it is a temporary situation. Mostly used for testing purposes. All you have to do is connect the right wires with the clutch and you can successfully bypass the neutral safety switch.

To ensure your car does not start up in gear, every car has a neutral safety switch. The switch is there to make sure there is safety and no mishap or accident. Eliminates the various ways your car could get into an accident.

The neutral safety switch can be bypassed. Though the method is different according to the different type of vehicle you are using. Make sure you know how to handle the situation-

On a boat:

It is possible to bypass a neutral safety switch on a boat. You just have to keep track of the correct wires. It is a good thing that the wires of the boat is colored. This makes the bypass process easier.

On ATV:

On an ATV, it is much harder to bypass the neutral safety switch. Mostly because there are a lot of wires involved. But if you are careful enough then you can easily bypass the safety switch.

On a motorcycle:

On motorcycles, a neutral safety switch is very important, as there are a lot of risk involved. For safety purposes, most bikers test out the neutral safety switch by doing a bypass. This is easy for a bike as there are less wires involved.

On Yamaha bear tracker:

There are many diagrams to show clearly how to bypass the neutral safety switch on a Yamaha bear tracker.

The wires and instructions are color coded so it is easier to follow through the instruction. It just requires a little bit more time than the other vehicles.

On tractor:

Though it is advised not to bypass the neutral safety switch on a tractor, but if the tractor is stuck you can try this to see if the engine works. The large wires of the tractor makes the process much easier.

On Chevy truck:

The neutral safety switch on a Chevy truck works just like any other vehicle. So you can bypass the safety switch of the Chevy truck normally.

Neutral safety switch are very important for your vehicle. And if you are to bypass the neutral safety switch, make sure you know the vehicle type well enough.

Is it safe to bypass a neutral safety switch?

Unless absolutely necessary, you should not bypass the neutral safety switch of your car. Though it is safe but you can’t do this as it will damage the car in the long run. Try not to bypass the neutral safety switch just to start the car.

Neutral safety switches are there to ensure that your vehicle does not get into any unwanted accident or mishap. The switch also ensures that your car does not start when in reverse mode, that is when a lot of accidents occur. So the switch is very important, try not to bypass it.

Most car owners do not like the idea of bypassing the neutral safety switch. It is very inconvenient and can cause a long run damage to the car.

For the time being it is a seemingly safe process. For testing purposes you can bypass the neutral safety switch but it should not be permanent.

2 reasons why you can bypass neutral safety switch

The neutral safety switch is there to ensure maximum safety for your car. To ensure that your car does not get in any accident, even when it is in reverse mode. The safety switch can be bypassed as well. But that is when it is absolutely necessary.

According to most vehicle owners, the neutral safety switch does not need to be bypassed. There is concrete reason to bypass the neutral safety switch.

However, there might be some good to bypassing the safety switch. Which is why a lot of people go for this method from time to time. There are two good reasons to this-

Testing purposes:

Most of the times, the vehicle owners test out the engines with the bypassing process. This is a temporary method, to see if the neutral safety switch will work when needed. This should not be done too many times or else it might cause permanent damage to the engine.

To start the vehicle:

Sometimes when the engines are stuck the vehicle will not start. Which is when you can try to bypass the neutral safety switch. The Engine should start as you bypass the safety switch. But this should not be used regularly.

Neutral safety switches can be very crucial to the vehicles. For safety purposes, the switch could be bypassed. However, this does not mean you can bypass the neutral switch whenever you want. Try not to use this method too often, as there is no necessary reasons to bypass the switch.

Do I need a neutral safety switch?

Neutral safety switches are important for your car. The switches ensure maximum safety for the vehicle, just as their name suggests.

You can use the switch to park or turn the car when it is in neutral mode. This makes the moves much more safer. And it also leaves little room for any mishaps.

There are many reasons why the neutral safety switch is so important for vehicles. The safety switch ensures that the car does not start working when in reverse mode.

This is particularly important to prevent any big accident or serious damage. Other than this the switch ensures less mishap for the vehicle.

Though it may not seem necessary for your vehicle on the surface, but you will need a neutral safety switch. This switch ensures maximum safety and prevents any damage. It is important for the car and you. Which is why most cars have the switch installed.

What happens if you bypass the neutral safety switch?

Bypassing the neutral safety switch can kick start the vehicle, if it is stuck. Which is why most vehicle owners prefer to bypass the neutral safety switch when the engines seem stuck.

There is a strong power force that ignites the engine and kick starts the vehicle when needed with the bypass.

Though it is not necessary. The car might start in any gear setting. Still if you prefer this way you can try this method. Bypassing the neutral safety switch requires a little bit of work as well. So if you are not a professional or experienced, you should not try this method out.

The neutral safety switch is there to make sure the vehicle is safe during reverse mode. The switch makes it safe to park or turn the car when it is on neutral mode. When you bypass the neutral safety switch, you basically ignite the engine again.

How to bypass neutral safety switch?

The bypass of the neutral safety switch can be a necessity. There might come times when you will have no other option but to bypass the safety switch. Which is why you should know how to do the bypass process on your own.

Bypassing the neutral safety switch is not that difficult, if you know what you are doing. Which is why we are giving you a detailed list on how to bypass the neutral safety switch. If you follow the instructions given below you will find the entire process easier to pull off-

• You have to find where the neutral safety switch of your vehicle is located.
• Look for the wire that originates from the neutral safety switch.
• Locate the external switch. It should be mounted on top of the axle.
• To start the bypass, cut the wire on the switch.
• You will need to bypass the wires by their colors.
• Start by connecting the purple wire and the purple with white stripe wire on the clutch switch.
• This should give the ignition the engine of your car needs. As the bypass is complete put the wires back in their previous setting.

Neutral safety switches should not be kept on bypass for a long period of time. It will cause damage to the vehicle engine. And the safety switch needs to be there to ensure safety and minimum chance of accident. You should be careful with the process.

Final thoughts

You can easily bypass the neutral safety switch of a vehicle. All you need to know is how to carry out the process. But this should not be done on a regular basis. Only when it is absolutely necessary, you can try to bypass the neutral safety switch. But make sure you know the process well enough.